Home /
Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator

Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator

Item #: 100480
|
Model: PEMS6000-HYM-IS
|
Manufacturer: Zurn

If you are looking to find your Zurn repair parts quickly and easily, you’ve come to the right place. This Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator is a direct replacement part manufactured by Zurn. Order this Zurn PEMS6000-HYM-IS today and you will have your Zurn repairs completed in no time at all

In Stock
8 Ready To Ship Today
Additional Quantities Typically Ship in 1-2 Weeks

Spec Sheet

$473.73

Product Downloads

PEMS6000-HYM-IS-spec

(Size: 119 KB)

Product Description
Specifications
Reviews (0)
Questions (3)

Product Description Specifications Reviews (0) Questions (3)

Questions:

vote

Q: We have numerous fixtures using the hardwired actuators. We found we cannot flush the toilets in a power outage. Is there any way to install a battery back up or manually flush these valves when the power is out?

Answer

Posted on Friday, April 28, 2017 on product Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator

0
vote

A: We recommend changing out your hardwired actuator with the ZERK-CPM E-Z Battery Powered Retrofit Kit (Part #100149). You will be able to keep the same valve body and switch out the existing hardwired actuator with the new battery operated actuator. This will ensure that you can still flush your fixtures if there is a power outage. If you have any other questions our experts are here to help! Call or text 800-518-5388

Posted by Kully Supply on Friday, April 28, 2017

vote

Q: we have 36 toilets and 12 urinals that have zurn aquavantage flush valve with the hard wired actuator (pems 6000-hym-is) we have had problems with the valves only flushing every other time. you can hear the actuator stoke but no flush. have tried recalibrating but does not change anything. do you have an explaination?

Answer

Posted on Monday, March 27, 2017 on product Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator

0
vote

A: It may be that you are not getting enough power to the valves causing them to malfunction. This Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator (Part #100480) requires 7.4 VDC to function properly. Zurn Power Converters can accomodate up to 8 Flush Valves. We suggest adding the appropriate amount of Power Converters. If you have any other questions our experts are here to help! Call or text 800-518-5388

Posted by Kully Supply on Monday, March 27, 2017

vote

Q: How do I perform recalibration of sensor?

Answer

Posted on Monday, February 3, 2014 on product Zurn PEMS6000-HYM-IS Side-Mounted Solenoid Actuator

0
vote

A: CALIBRATION INSTRUCTIONS FOR ZEMS-IS 1. Obtain a target. SEE FIGURE 12. 2. PRESS and HOLD button for 10 seconds * until the LED turns solid. (*Unit will blink and flush once while button is being held) 3. RELEASE finger when LED turns solid. Unit is calibrating. 4. Set target at desired distance, (No less than 16") from sensor face and verify NO other objects are in view of sensor face. 5. Keep target steady until the calibration cycle ends with two fast blinks. 6. For closet installations continue to "VERIFY CALIBRATION FOR CLOSET INSTALLATIONS". CALIBRATION INSTRUCTIONS FOR ZEMS-IS III 1. Obtain a target. SEE FIGURE 12. 2. PRESS and HOLD button for 10 seconds * until the LED turns solid. (*Unit will blink four times and flush once while button is being held) 3. RELEASE finger after LED turns solid. 4. PRESS and HOLD button when LED starts blinking. 5. RELEASE finger when LED turns solid. 6. Set target at desired distance, (No less than 16") from sensor face and verify NO other objects are in view of sensor face. 7. Keep target steady - Unit will blink while calibrating. 8. After 15 seconds, calibration ends with a fast double blink or a solid LED for 5 seconds. 9. IF THE LED REMAINS SOLID FOR 5 SECONDS AFTER CALIBRATION, the calibration was NOT successful. REPEAT STEPS 2-8 10. For closet installations continue to "VERIFY CALIBRATION FOR CLOSET INSTALLATIONS"

Posted by Kully Supply on Monday, February 3, 2014